Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
270Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
3.3mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG508 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Power Dissipation |
3mW |
Max Supply Current |
1μA |
Turn On Delay Time |
230 ns |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
130 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
270Ohm Typ |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
93 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
3pF 22pF |
On-state Resistance Match-Nom |
8.1Ohm |
Switch Time (Ton, Toff) (Max) |
230ns, 130ns |
Charge Injection |
15pC |
Channel-to-Channel Matching (ΔRon) |
8.1 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Drain to Source Resistance |
390Ohm |
Signal Current-Max |
0.02A |
Voltage - Supply, Dual (V±) |
±15V |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG508FBRUZ Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 8 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. There is an electrical component included in the 16 series. 1 circuits are used in this analogue multiplexer. If you are looking for variants of the digital switch, trying search with ADG508. As far as internal resistance is concerned, it has 270Ohm. The datasheets for the 16 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 16.5V. In order for the electronic part to function properly, the lowest voltage should be 10.8V. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 22V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. There is a voltage range of 15V operating voltages for the electrical part. This electronic component presents a Drain to Source resistance of 390Ohm.
ADG508FBRUZ Features
8 Channels
Drain-to-Source resistance: 390Ohm
ADG508FBRUZ Applications
There are a lot of Analog Devices Inc. ADG508FBRUZ Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- Avionics and Military Systems
- DSLAMs
- PBX interfaces
- 65 V DACs
- Digital Cross-Connects
- Microwave transmission systems
- Multiplexers
- ISDN NT1/TA
- DSUs