ADG508FBRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 270Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 3.3mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG508 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 100nA |
| Power Dissipation | 3mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 230 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 270Ohm Typ |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 22pF |
| On-state Resistance Match-Nom | 8.1Ohm |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG508FBRUZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. There are 16 terminations totally. The electronic part delivers high-quality output through its 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. It consists of 1 circuits. Try searching with ADG508 if you're looking for variants. The internal resistance of this digital multiplexer is 270Ohm. To find out what the 16 pins do, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. A analog switch ic that has a cost-effective Dual supply type. In order for the electronic part to function properly, the lowest voltage should be 10.8V. This multiplexer would work with 100nA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. 15V operating voltages are supported by the electronic component.
ADG508FBRUZ-REEL7 Features
8 Channels
100nA Supply Current
ADG508FBRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG508FBRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Remote Powered Equipment
- Central office
- Microprocessor controlled systems
- Relay Replacement
- Cell phones
- Multi-Line E1 Interface Cards
- Channel Banks
- Audio and video switching
- Routers
- Microprocessor Controlled Analog Systems
