ADG509AKN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG509 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 27mW |
| Throw Configuration | 4PST |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 11pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 5.33mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG509AKN Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 4:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. Using the ADG509 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 450Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 16.5V to a switch device. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 10.8V. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. For dual power supplies, a voltage of at least 10.8V should be attached. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. The 8 inputs need to be operated in order to work.
ADG509AKN Features
1 Channels
Switch Circuit: SP4T
ADG509AKN Applications
There are a lot of Analog Devices Inc. ADG509AKN Analog Switches & Multiplexers ICs applications.
- Imaging
- Relay Replacement
- Data Acquisition Systems
- Communications systems
- Fiber In The Loop (FITL)
- Cable PC
- DSUs
- Audio and video signal routing
- Digital access cross connects
- PCMCIA cards
