ADG509AKNZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG509 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 27mW |
| Throw Configuration | 4PST |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 600 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 11pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 280Ohm |
| Height | 3.3mm |
| Length | 20.07mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG509AKNZ Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Through Hole. There is 4:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 16 terminations. High-quality output is provided by the electronic component's 4 channels. A 15V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SP4T switching circuits. The multiplexer consists of 2 circuits. Use ADG509 to search for variants of the digital switches. An switch multiplexer with 450Ohm internal resistance has a value of 450Ohm. You can find the functions of the 16 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Multiplexers should not be powered above 16.5V in normal situations. The lowest voltage the electronic part should receive is 10.8V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. It is possible to operate 8 inputs. There is 280Ohm resistance between Drain and Source for this electronic part.
ADG509AKNZ Features
4 Channels
Switch Circuit: SP4T
Drain-to-Source resistance: 280Ohm
ADG509AKNZ Applications
There are a lot of Analog Devices Inc. ADG509AKNZ Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Audio and video routing
- SDH
- Private Branch Exchange (PBX)
- Relay replacements
- Transmit
- Industrial
- Relay Replacement
- Fiber In The Loop (FITL)
- Microwave transmission systems
