Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
450Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
28mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
ADG509 |
Pin Count |
16 |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Operating Supply Current |
600μA |
Nominal Supply Current |
1.5mA |
Power Dissipation |
27mW |
Max Supply Current |
1.5mA |
Throw Configuration |
4PST |
Propagation Delay |
300 ns |
Turn On Delay Time |
400 ns |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
400 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
450Ohm |
Min Dual Supply Voltage |
10.8V |
High Level Output Current |
20mA |
Dual Supply Voltage |
12V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 11pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
22.5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG509AKR Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. A 15V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SP4T switching circuits. The circuits in this analogue multiplexer number 2. Try searching with ADG509 to find analog multiplexer variants. A 450Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 16.5V to the switch device in normal circumstances. A low voltage of 10.8V should be applied to the electronic component. The switch device would be able to operate with 600μA current. When the digital multiplexer is charged above 1.5mA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 16.5V. For dual power supplies, a voltage of at least 10.8V should be attached. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. Operating the 8 inputs requires 8 inputs.
ADG509AKR Features
1 Channels
Switch Circuit: SP4T
600μA Supply Current
ADG509AKR Applications
There are a lot of Analog Devices Inc. ADG509AKR Analog Switches & Multiplexers ICs applications.
- PBXs
- Remote Powered Equipment
- Sample-and-hold systems
- FTTH
- Public switching systems
- ATM
- Avionics test equipment
- Microprocessor controlled systems
- Cell phones
- Transmit