Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
450Ohm |
Max Power Dissipation |
470mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG509 |
Pin Count |
16 |
Operating Supply Voltage |
15V |
Number of Channels |
1 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
Operating Supply Current |
600μA |
Power Dissipation |
27mW |
Throw Configuration |
4PST |
Propagation Delay |
300 ns |
Turn On Delay Time |
450 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
450Ohm |
Min Dual Supply Voltage |
10.8V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 11pF |
On-state Resistance Match-Nom |
22.5Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
22.5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG509AKR-REEL7 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SP4T switching are used to construct these analog switch ics. 2 circuits are used in this analogue multiplexer. Search with ADG509 if you are looking for analog multiplexer variants. An switch multiplexer with 450Ohm internal resistance has a value of 450Ohm. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 10.8V. It would be sufficient to run this analogue multiplexer with 600μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. This electrical part is compatible with 15V operating voltages. Operating 8 inputs is required.
ADG509AKR-REEL7 Features
1 Channels
Switch Circuit: SP4T
600μA Supply Current
ADG509AKR-REEL7 Applications
There are a lot of Analog Devices Inc. ADG509AKR-REEL7 Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- Channel Banks
- Remote wireless modules
- Cellular phones
- Avionics
- Automotive applications
- Fiber to the Home
- Cell phones
- Communication systems
- SONET