ADG509AKRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG509 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 600μA |
| Power Dissipation | 27mW |
| Throw Configuration | 4PST |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 450 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 1.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 450 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 11pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG509AKRZ-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 4:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. 16 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SP4T switching circuits. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with ADG509. Internally, this switch multiplexer has a resistance of 450Ohm. You can find the functions of the 16 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 16.5V. Digital switch that provides Dual, Single power at a cost-effective price. A low voltage of 10.8V should be applied to the electronic component. The analogue multiplexer could operate on 600μA current. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. When using dual power supplies, you should attach at least 10.8V. 15V operating voltages can be used with this electrical part. The 8 inputs need to be operated in order to work.
ADG509AKRZ-REEL Features
4 Channels
Switch Circuit: SP4T
600μA Supply Current
ADG509AKRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG509AKRZ-REEL Analog Switches & Multiplexers ICs applications.
- Cell phones
- Wireless Local Loop
- MP3 players
- Modems
- PBXs
- Sample hold systems
- E1 Multiplexer
- Digital cross connects (DSX-1)
- Digital access cross connects
- Transmit
