ADG509AKRZ-REEL7
| Parameters | |
|---|---|
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 27mW |
| Throw Configuration | 4PST |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 600 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 11pF |
| On-state Resistance Match-Nom | 22.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1kOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG509 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
ADG509AKRZ-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. Totally, there are 16 terminations. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. Multiplexers built on a SP4T switching circuit are built. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with ADG509. Internally, this switch multiplexer has a resistance of 1kOhm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. It is recommended to use 10.8V as the lowest voltage for the electrical part. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. Among the inputs that can be operated are the 8 inputs.
ADG509AKRZ-REEL7 Features
1 Channels
Switch Circuit: SP4T
ADG509AKRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG509AKRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Audio and video signal routing
- Audio signal routing
- Communication systems
- Precision data acquisition
- Industrial control systems
- Audio and video switching
- Access Concentrators
- Video switching
- Mechanical reed relay replacement
