ADG509FBRNZ-REEL7

230ns, 130ns SP4T 270Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG509 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG509FBRNZ-REEL7
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 744
Description: 230ns, 130ns SP4T 270Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG509 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	270Ohm
Max Power Dissipation	3.3mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG509
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Operating Supply Current	100nA
Power Dissipation	3mW
Max Supply Current	1μA
Throw Configuration	4PST
Turn On Delay Time	230 ns
Logic Function	Multiplexer
Number of Inputs	8
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	270Ohm Typ
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 12pF
On-state Resistance Match-Nom	8.1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	230ns, 130ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	8.1 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	300ns
Switch-off Time-Max	150ns
Neg Supply Voltage-Min (Vsup)	-13.5V
Voltage - Supply, Dual (V±)	±15V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG509FBRNZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Circuits based on SP4T switching are used to construct these analog switch ics. The multiplexer consists of 2 circuits. Using the ADG509 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 270Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. Analog switch ics with Dual supply type are cost-effective. 10.8V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 100nA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. A voltage of 15V can be used to operate the electronic component. Among the inputs that can be operated are the 8 inputs.