ADG509FBRUZ

230ns, 130ns SP4T 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG509 16 Pins 1nA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG509FBRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 269
Description: 230ns, 130ns SP4T 270Ohm Typ DUAL Analog Switches BREAK-BEFORE-MAKE ADG509 16 Pins 1nA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	270Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.3mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG509
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Power Dissipation	3mW
Max Supply Current	1μA
Turn On Delay Time	230 ns
Number of Inputs	8
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	270Ohm Typ
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	93 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 12pF
On-state Resistance Match-Nom	8.1Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	230ns, 130ns
Charge Injection	15pC
Channel-to-Channel Matching (ΔRon)	8.1 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	300ns
Switch-off Time-Max	150ns
Drain to Source Resistance	390Ohm
Neg Supply Voltage-Min (Vsup)	-13.5V
Voltage - Supply, Dual (V±)	±15V
Height	1.2mm
Length	5.1mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount

ADG509FBRUZ Overview

This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. SP4T switching circuits are used in these analog switch ics. A total of 2 circuits make up this switch device. Try searching with ADG509 to find analog multiplexer variants. It has an internal resistance of 270Ohm. You can find the functions of the 16 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 16.5V should not normally be supplied to the switches. The lowest voltage the electronic part should receive is 10.8V. When the digital multiplexer is charged above 1μA, damage can occur. There is no problem with using dual supply voltage, but it should not exceed 22V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A voltage of 15V can be used to operate the electronic component. There are 8 inputs to be operated. Drain to Source resistance for this electronic component is 390Ohm.