ADG509FBRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 270Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 3.3mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG509 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 100nA |
| Power Dissipation | 3mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 230 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 270Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 12pF |
| On-state Resistance Match-Nom | 8.1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 150ns |
| Neg Supply Voltage-Min (Vsup) | -13.5V |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG509FBRUZ-REEL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. Electronic part bodies are injected with 16 pins. A SP4T switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. Try searching for the analog switch ic with ADG509 if you are looking for variants. This digital multiplexer has 270Ohm internal resistance. Please refer to the datasheets for 16 pins functions. A voltage higher than 16.5V should not normally be supplied to the switches. Analogue multiplexers of the Dual supply type that are cost-effective. 10.8V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 100nA. It may damage the digital multiplexer if the voltage is higher than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIt can operate from 15V operating voltages.
ADG509FBRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
100nA Supply Current
ADG509FBRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG509FBRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- High speed data transmission line cards
- Mechanical reed relay replacement
- FTTH
- Public switching systems
- Data Acquisition Systems
- Avionics
- Precision test equipment
- Imaging
- High-Voltage
