ADG509FBRWZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 270Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 3.3mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG509 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 3mW |
| Max Supply Current | 1μA |
| Throw Configuration | 4PST |
| Turn On Delay Time | 230 ns |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 270Ohm Typ |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 12pF |
| On-state Resistance Match-Nom | 8.1Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 230ns, 130ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 8.1 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG509FBRWZ Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.295, 7.50mm Width). The advanced packaging method Tube provides high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. Using the ADG509 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 270Ohm. Please refer to the datasheets for 16 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. 10.8V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 1μA, damage can occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. A voltage of 15V can be used to operate the electronic component. It is possible to operate 8 inputs.
ADG509FBRWZ Features
1 Channels
Switch Circuit: SP4T
ADG509FBRWZ Applications
There are a lot of Analog Devices Inc. ADG509FBRWZ Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Precision data acquisition
- Video signal routing
- Remote Powered Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fiber In The Loop (FITL)
- RGB switches
- Intelligent PBX
- Battery Powered Systems
- CSU
