banner_page

ADG511BNZ

200ns, 120ns (Typ) SPST - NC 30Ohm Typ DUAL Analog Switches ADG511 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG511BNZ
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 578
  • Description: 200ns, 120ns (Typ) SPST - NC 30Ohm Typ DUAL Analog Switches ADG511 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 9pF 9pF
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 200ns, 120ns (Typ)
Charge Injection 11pC
Crosstalk -85dB @ 1MHz
Switch-on Time-Max 375ns
Switch-off Time-Max 150ns
Height 3.3mm
Length 20.07mm
Width 6.35mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 30Ohm
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 470mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 4
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number ADG511
Pin Count 16
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Channels 4
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Power Dissipation 470mW
Throw Configuration SPST
Voltage - Supply, Single/Dual (±) 3V~5.5V ±4.5V~5.5V
Neg Supply Voltage-Nom (Vsup) -5V
Max Dual Supply Voltage 5.5V
On-State Resistance (Max) 30Ohm Typ
Min Dual Supply Voltage 4.5V
Screening Level MIL-STD-883
Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 1:1

ADG511BNZ Overview


Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. There are 16 pins injected into the electronic part body. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Using the ADG511 search parameter, you can discover variants of the switch. It has an internal resistance of 30Ohm. The functions of 16 pins can be found in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. A low voltage of 4.5V should be applied to the electronic component. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5.5V. It is recommended that you attach at least 4.5V to your dual power supply. 5V operating voltages can be used with this electrical part.

ADG511BNZ Features


4 Channels
Switch Circuit: SPST - NC

ADG511BNZ Applications


There are a lot of Analog Devices Inc. ADG511BNZ Analog Switches & Multiplexers ICs applications.

  • E1 Network Equipment
  • Ultrasound
  • Channel Banks
  • Imaging
  • Video signal routing
  • 65 V DACs
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Low-Voltage
  • Switching Systems
  • DVD-R

Write a review

Note: HTML is not translated!
    Bad           Good