ADG511BRZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 30Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 10μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG511 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 100pA |
| Power Dissipation | 10μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 375 ns |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V ±4.5V~5.5V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 5.5V |
| On-State Resistance (Max) | 30Ohm Typ |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 200ns, 120ns (Typ) |
| Charge Injection | 11pC |
| Crosstalk | -85dB @ 1MHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG511BRZ-REEL7 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. The electronic part provides high-quality output because it has 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. 16 pins are injected to the electronic part body. A SPST - NC switching circuit is used to build these analog multiplexers. Try searching for ADG511 variants of the analog switch ic. This digital multiplexer has 30Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 4.5V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 100pA. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. With dual power supplies, you should attach at least 4.5V.
ADG511BRZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NC
100pA Supply Current
ADG511BRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG511BRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Medical systems
- Public switching systems
- PDAs
- Multi-Line E1 Interface Cards
- Automatic test equipment
- Remote wireless modules
- SDH
- Routers
- Audio signal routing
- SONET
