ADG512BNZ

200ns, 120ns (Typ) SPST - NO 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG512 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG512BNZ
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 206
Description: 200ns, 120ns (Typ) SPST - NO 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG512 16 Pins 100pA 5V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Peak Reflow Temperature (Cel)	NOT APPLICABLE
Number of Functions	4
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	NOT APPLICABLE
Base Part Number	ADG512
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	375 ns
Voltage - Supply, Single/Dual (±)	3V~5.5V ±4.5V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	30Ohm Typ
Min Dual Supply Voltage	4.5V
Screening Level	MIL-STD-883
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	200ns, 120ns (Typ)
Charge Injection	11pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	75Ohm
Normal Position	NO
Height	3.3mm
Length	20.07mm
Width	6.35mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG512BNZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. There are 16 terminations totally. As a result of its 4 channels, this electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. Based on SPST - NO switching circuits, these analog multiplexers work. Using the ADG512 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 30Ohm. Datasheets for 16 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Dual, Single supply type digital switch with a low cost. 4.5V is the lowest voltage the electrical component should receive. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. With dual power supplies, you should attach at least 4.5V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It can operate from 5V operating voltages. Drain to Source resistance for this electronic component is 75Ohm.