Parameters |
Resistance |
30Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
10μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG512 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
100pA |
Power Dissipation |
10μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
375 ns |
Voltage - Supply, Single/Dual (±) |
3V~5.5V ±4.5V~5.5V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Turn-Off Delay Time |
150 ns |
Max Dual Supply Voltage |
5.5V |
On-State Resistance (Max) |
30Ohm Typ |
Min Dual Supply Voltage |
4.5V |
Dual Supply Voltage |
5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 9pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
200ns, 120ns (Typ) |
Charge Injection |
11pC |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Height |
1.75mm |
Length |
10mm |
Width |
4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
ADG512BRZ-REEL7 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for the analog switch ic with ADG512 if you are looking for variants. Analog switches have 30Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Dual, Single supply type. 4.5V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 100pA. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 5.5V. It is recommended that you attach at least 4.5V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There is a voltage range of 5V operating voltages for the electrical part.
ADG512BRZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
ADG512BRZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG512BRZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Routers
- PDAs
- Cross Connects
- Cable PC
- Power routing
- Cell phones
- SONET
- Data switching
- Digital Cross-Connects
- Battery Powered Systems