ADG513BRZ

200ns, 120ns (Typ) SPST - NO/NC 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG513 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG513BRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 261
Description: 200ns, 120ns (Typ) SPST - NO/NC 30Ohm Typ Analog Switches BREAK-BEFORE-MAKE ADG513 16 Pins 100pA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	30Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG513
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	100pA
Nominal Supply Current	1μA
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	375 ns
Voltage - Supply, Single/Dual (±)	3V~5.5V ±4.5V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	30Ohm Typ
Min Dual Supply Voltage	4.5V
Screening Level	MIL-STD-883
High Level Output Current	30mA
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	200ns, 120ns (Typ)
Charge Injection	11pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG513BRZ Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Try searching with ADG513 to find analog multiplexer variants. In this multiplexer, the internal resistance is 30Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. There should be 4.5V voltage fed to the electrical part below 4.5V. This multiplexer would work with 100pA current. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 5.5V. If you are using dual power supplies, you should attach at least 4.5V. There is a voltage range of 5V operating voltages for the electrical part.