ADG5204BCPZ-RL7
| Parameters | |
|---|---|
| Power Dissipation | 1.1mW |
| Max Supply Current | 70μA |
| Turn On Delay Time | 285 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 136MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 215 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| High Level Output Current | 35.7mA |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 26pF |
| On-state Resistance Match-Nom | 4.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 185ns, 175ns |
| Charge Injection | -0.6pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 320ns |
| Drain to Source Resistance | 170Ohm |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 0.8mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Additional Feature | VIDEO APPLICATION |
| Max Power Dissipation | 1.1mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5204 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 36V |
| Number of Channels | 4 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 85μA |
ADG5204BCPZ-RL7 Overview
Due to its 16-WQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SP4T switching circuits, these analog multiplexers work. The multiplexer consists of 1 circuits. ADG5204 can be used to search for analog multiplexer variants. It has an internal resistance of 160Ohm. Datasheets for 16 pin functions are available upon request. Multiplexers should not be powered above 40V in normal situations. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 9V. For this multiplexer to operate, 85μA current would be sufficient. It may damage the digital multiplexer if the voltage is higher than 70μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. You should attach at least 9V voltage if you are using dual power supply. It can operate from 36V operating voltages. In 136MHz-bandwidths, data can be transferred. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION. Drain to Source resistance for this electronic component is 170Ohm.
ADG5204BCPZ-RL7 Features
4 Channels
Switch Circuit: SP4T
85μA Supply Current
-3db Bandwidth: 150MHz
Bandwidth: 136MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 170Ohm
ADG5204BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5204BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- PBX interfaces
- Industrial
- Cable Modem
- Wireless Local Loop
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- DSLAMs
- Audio/video switches
- Remote wireless modules
- SDH/SONET multiplexers
