ADG5206BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADG5206 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Power Supplies | +-9/+-22/9/40V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 9V |
| Min Supply Voltage | 9V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Turn On Delay Time | 360 ns |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 55MHz |
| Turn-Off Delay Time | 285 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 65MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 3.3pf 62pF |
| Switch Time (Ton, Toff) (Max) | 230ns, 185ns |
| Charge Injection | 0.45pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -76dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 370ns |
| Drain to Source Resistance | 170Ohm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5206BCPZ-RL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 32-WFQFN Exposed Pad, CSP. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. 16:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 32 terminations. The electronic part provides high-quality output because it has 16 channels. A total of 32 pins are injected into the body of the electronic part. There are 1 circuits in this multiplexer. Try searching for ADG5206 variants of the analog switch ic. As far as internal resistance is concerned, it has 160Ohm. The datasheets for the 32 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. Multiplexers should not be powered above 9V in normal situations. A low voltage of 9V should be applied to the electronic component. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 9V. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. 55MHz bandwidths enable data to be transferred. The Drain to Source resistance of this electronic component is 170Ohm.
ADG5206BCPZ-RL7 Features
16 Channels
-3db Bandwidth: 65MHz
Bandwidth: 55MHz
Drain-to-Source resistance: 170Ohm
ADG5206BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5206BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Routers
- Sample hold systems
- Audio and video switching
- USB 1.1 signal switching circuits
- DSLAMs
- Mechanical reed relay replacement
- Audio and video signal routing
- Power routing
- Cross Connects
