ADG5208BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Max Power Dissipation | 1.1mW |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Base Part Number | ADG5208 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 36V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 80μA |
| Power Dissipation | 1.1mW |
| Max Supply Current | 130μA |
| Turn On Delay Time | 245 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 54MHz |
| Turn-Off Delay Time | 180 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 33pF |
| Switch Time (Ton, Toff) (Max) | 170ns, 140ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Drain to Source Resistance | 170Ohm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5208BCPZ-RL7 Overview
Shipping overseas is convenient with the electronic component packed in 16-WQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. High-quality output is provided by the electronic component's 8 channels. As part of the design of the 16 series, this electronic part has been incorporated into the system. The circuits in this analogue multiplexer number 1. Using the ADG5208 search parameter, you can discover variants of the switch. It has an internal resistance of 160Ohm. You can find the functions of the 16 pins in the datasheets. Users should never supply a voltage higher than 40V to a switch device. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 9V voltage fed to the electrical part below 9V. This multiplexer would work with 80μA current. A digital multiplexer may suffer damage if voltage is applied above 130μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. You should attach at least 9V voltage if you are using dual power supply. Operating voltages range from 36V. The transfer of data can be performed over 54MHz bandwidths. Drain to Source resistance for this electronic component is 170Ohm.
ADG5208BCPZ-RL7 Features
8 Channels
80μA Supply Current
-3db Bandwidth: 60MHz
Bandwidth: 54MHz
Drain-to-Source resistance: 170Ohm
ADG5208BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5208BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- Audio and video signal routing
- Audio and video routing
- Sample-and-hold systems
- SONET
- Industrial and process control systems
- CSU
- Audio/video switches
- Wireless Local Loop
- Low-Voltage
