ADG5208FBRUZ
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 33pF |
| On-state Resistance Match-Nom | 2.5Ohm |
| Switch Time (Ton, Toff) (Max) | 170ns, 140ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 260ns |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 160Ohm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5208 |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 54MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
ADG5208FBRUZ Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 8:1. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. The electronic part provides high-quality output because it has 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. 16 pins are injected to the electronic part body. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with ADG5208. A 160Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. Users shouldn't supply more than 44V voltage to the switch device. A low voltage of 8V should be applied to the electronic component. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. If you are using a dual power supply, you should attach at least 5V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. It is possible to transfer data over a 54MHz-bandwidth.
ADG5208FBRUZ Features
8 Channels
-3db Bandwidth: 60MHz
Bandwidth: 54MHz
ADG5208FBRUZ Applications
There are a lot of Analog Devices Inc. ADG5208FBRUZ Analog Switches & Multiplexers ICs applications.
- DSUs
- Digital cross connects (DSX-1)
- Avionics
- CSU
- Avionics and Military Systems
- New designs requiring multiplexer functions
- Digital Cross-Connects
- High-Voltage
- Ultrasound
- Avionics test equipment
