ADG5208FBRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 160Ohm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5208 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 54MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 33pF |
| On-state Resistance Match-Nom | 2.5Ohm |
| Switch Time (Ton, Toff) (Max) | 170ns, 140ns |
| Charge Injection | 0.3pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 260ns |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5208FBRUZ-RL7 Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 16. Due to its 8 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 16 series of products. Circuits number 1 make up this analogue multiplexer. Try searching with ADG5208 if you're looking for variants. This digital multiplexer has 160Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The transfer of data can be performed over 54MHz bandwidths.
ADG5208FBRUZ-RL7 Features
8 Channels
-3db Bandwidth: 60MHz
Bandwidth: 54MHz
ADG5208FBRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5208FBRUZ-RL7 Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Medical
- Sample-and-hold systems
- Precision data acquisition
- E1 Network Equipment
- Avionics
- High-Voltage
- PDH Multiplexers
- Relay replacements
- Sample hold systems
