ADG5208SRU-EP-RL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG5208 |
| Pin Count | 16 |
| Power Supplies | +-9/+-22/9/40V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 54MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 121MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 33pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Time (Ton, Toff) (Max) | 140ns, 185ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Signal Current-Max | 0.0483A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG5208SRU-EP-RL7 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Operational temperature extended around -55°C~125°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 8 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. This multiplexer is composed of 1 circuits. ADG5208 can be used to search for analog multiplexer variants. Datasheets for 16 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. In 54MHz-bandwidths, data can be transferred.
ADG5208SRU-EP-RL7 Features
8 Channels
-3db Bandwidth: 121MHz
Bandwidth: 54MHz
ADG5208SRU-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADG5208SRU-EP-RL7 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Video switching
- MP3 players
- Communications systems
- Precision instrumentation
- Intelligent PBX
- PCMCIA cards
- FTTH
- PDH Multiplexers
- PBX interfaces
