ADG5208SRUZ-EP-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG5208 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 54MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 121MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 33pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Time (Ton, Toff) (Max) | 140ns, 185ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
ADG5208SRUZ-EP-RL7 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 16 terminations. By its 8 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component like this is included in the 16 series. A total of 1 circuits make up this switch device. Try searching for ADG5208 variants of the analog switch ic. The datasheets for the 16 pins explain the functions. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. A 54MHz-bandwidth can be used for data transfer.
ADG5208SRUZ-EP-RL7 Features
8 Channels
-3db Bandwidth: 121MHz
Bandwidth: 54MHz
ADG5208SRUZ-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADG5208SRUZ-EP-RL7 Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Relay replacements
- Fiber to the Home
- Precision test equipment
- Audio and video routing
- Data switching
- Access Concentrators
- Avionics test equipment
- Industrial and process control systems
- Video signal routing
