ADG5209BCPZ-RL7
| Parameters | |
|---|---|
| Base Part Number | ADG5209 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 36V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Operating Supply Current | 80μA |
| Power Dissipation | 1.1mW |
| Max Supply Current | 130μA |
| Turn On Delay Time | 245 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 133MHz |
| Turn-Off Delay Time | 180 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 17pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 140ns, 185ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Max Power Dissipation | 1.1mW |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
ADG5209BCPZ-RL7 Overview
This electronic part is conveniently packaged in 16-WQFN Exposed Pad, CSP, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. The operating temperature is extended to around -40°C~125°C TA. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 4 channels. An injection of 16 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SP4T switching circuits. There are 2 circuits in this multiplexer. Try searching for ADG5209 variants of the analog switch ic. As far as internal resistance is concerned, it has 160Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 40V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 9V. The analogue multiplexer could operate on 80μA current. If put voltage greater than 130μA on the device, damage may be caused to the analogue multiplexer. There is no problem with using dual supply voltage, but it should not exceed 22V. The voltage should be at least 9V if you are using dual power supplies. A voltage of 36V can be used to operate the electronic component. There are 8 inputs to be operated. It is possible to transfer data over a 133MHz-bandwidth.
ADG5209BCPZ-RL7 Features
4 Channels
Switch Circuit: SP4T
80μA Supply Current
-3db Bandwidth: 130MHz
Bandwidth: 133MHz
ADG5209BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5209BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- PCMCIA cards
- Low-Voltage
- T1/E1 Terminals
- SDH/SONET multiplexers
- DVD-R
- Multiplexers
- DSLAMs
- Central office
- Communication systems
