ADG5209BRUZ

140ns, 185ns SP4T 160Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5209 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5209BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 474
Description: 140ns, 185ns SP4T 160Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG5209 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	160Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.1mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5209
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	36V
Number of Channels	4
Interface	Parallel
Number of Circuits	2
Max Supply Voltage	40V
Min Supply Voltage	9V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	110μA
Power Dissipation	1.1mW
Max Supply Current	130μA
Turn On Delay Time	245 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Bandwidth	133MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	180 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	130MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.8pF 17pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	140ns, 185ns
Charge Injection	0.4pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	230Ohm
Height	1.05mm
Length	5.1mm
Width	4.5mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5209BRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. This electronic part offers high-quality output due to its 4 channels. An 15V voltage supply should allow the electrical part to be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. The analog switch ics are built using SP4T switching circuits. There are 2 circuits in this multiplexer. Try searching for the analog switch ic with ADG5209 if you are looking for variants. This digital multiplexer has 160Ohm internal resistance. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 40V should not normally be supplied to the switches. 9V is the lowest voltage the electrical component should receive. It may damage the digital multiplexer if the voltage is higher than 130μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. In the case of dual power supplies, you should connect at least 9V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. 36V operating voltages can be used with this electrical part. The 8 inputs need to be operated in order to work. In 133MHz-bandwidths, data can be transferred. There is also VIDEO APPLICATION to look out for in this electronic part. Resistivity from Drain to Source is 230Ohm for this electronic part.