ADG5209FBRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 480Ohm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5209 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 133MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 17pF |
| On-state Resistance Match-Nom | 2.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 140ns, 185ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 145ns |
| Length | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5209FBRUZ Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. Surface Mount is where this multiplexer is located. 4:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~125°C TA extended. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. Circuits based on SP4T switching are used to construct these analog switch ics. A 2 circuit is present in this switch device. ADG5209 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 480Ohm. Please refer to the datasheets for 16 pins functions. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. A 133MHz-bandwidth can be used for data transfer.
ADG5209FBRUZ Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 130MHz
Bandwidth: 133MHz
ADG5209FBRUZ Applications
There are a lot of Analog Devices Inc. ADG5209FBRUZ Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Ultrasound
- Precision test equipment
- DSUs
- Routers
- Optical Applications
- Digital cross connects (DSX-1)
- PDAs
- Isolation
