ADG5209FBRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 160Ohm |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5209 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 133MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 130MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 17pF |
| On-state Resistance Match-Nom | 2.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 140ns, 185ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 145ns |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5209FBRUZ-RL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature extended to -40°C~125°C TA. The total number of terminations is 16. A high-quality output is provided by the electrical component's 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SP4T switching circuits. A 2 circuit is present in this switch device. Try searching with ADG5209 if you're looking for variants. Internally, this switch multiplexer has a resistance of 160Ohm. You can find the functions of the 16 pins in the datasheets. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. The transfer of data can be performed over 133MHz bandwidths.
ADG5209FBRUZ-RL7 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 130MHz
Bandwidth: 133MHz
ADG5209FBRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5209FBRUZ-RL7 Analog Switches & Multiplexers ICs applications.
- Imaging
- Digital Cross-Connects
- Access Concentrators
- Precision test equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Signal routing between systems
- Channelized and Unchannelized DS3 applications
- Microprocessor Controlled Analog Systems
- Audio and video switching
- New designs requiring multiplexer functions
