ADG5209SRU-EP-RL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG5209 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 1.1mW |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Bandwidth | 133MHz |
| Supply Current-Max (Isup) | 0.155mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 225MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.8pF 17pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 140ns, 185ns |
| Charge Injection | 0.4pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.0345A |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG5209SRU-EP-RL7 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Extended operating temperature around -55°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SP4T switching circuits. It consists of 2 circuits. ADG5209 can be used to search for analog multiplexer variants. To find out what the 16 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The transfer of data can be performed over 133MHz bandwidths.
ADG5209SRU-EP-RL7 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 225MHz
Bandwidth: 133MHz
ADG5209SRU-EP-RL7 Applications
There are a lot of Analog Devices Inc. ADG5209SRU-EP-RL7 Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- Microwave transmission systems
- Precision instrumentation
- CSU
- Isolation
- Power routing
- Sample hold systems
- High speed data transmission line cards
- PBX interfaces
- Microprocessor Controlled Analog Systems
