ADG5212BCPZ-RL7

195ns, 165ns SPST - NO 160Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG5212 16 Pins 100pA 15V 16-WQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5212BCPZ-RL7
Package: 16-WQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 783
Description: 195ns, 165ns SPST - NO 160Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG5212 16 Pins 100pA 15V 16-WQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-WQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	160Ohm
Terminal Finish	Matte Tin (Sn)
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5212
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Operating Supply Current	80μA
Max Supply Current	55μA
Throw Configuration	SPST
Turn On Delay Time	210 ns
Logic Function	Multiplexer
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	435MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	170 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	460MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.8pF 4.8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	195ns, 165ns
Insertion Loss (dB)	-6.8 dB
Charge Injection	-0.5pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-105dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Normal Position	NO
Height Seated (Max)	0.8mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5212BCPZ-RL7 Overview

This electronic part is conveniently packaged in 16-WQFN Exposed Pad, CSP, making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~125°C TA are extended for operation. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16 pins. A SPST - NO switching circuit is used for these analog switches. Try searching with ADG5212 to find analog multiplexer variants. As far as internal resistance is concerned, it has 160Ohm. The functions of 16 pins can be found in the datasheets. It is generally not recommended to supply a voltage higher than 40V to the switch device in normal circumstances. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 9V should be applied to the electronic component. This digital switch can be operated with a current of 80μA. It may damage the digital multiplexer if the voltage is higher than 55μA. There is no problem with using dual supply voltage, but it should not exceed 22V. In the case of dual power supplies, you should connect at least 9V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A 4 input needs to be operated. There are 435MHz bandwidths for data transfer.