ADG5212BRUZ-RL7

195ns, 165ns SPST - NO 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5212 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5212BRUZ-RL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 315
Description: 195ns, 165ns SPST - NO 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5212 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Base Part Number	ADG5212
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Operating Supply Current	80μA
Max Supply Current	55μA
Throw Configuration	SPST
Turn On Delay Time	210 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	435MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	170 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	460MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.8pF 4.8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	195ns, 165ns
Insertion Loss (dB)	-6.8 dB
Charge Injection	-0.5pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-105dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Normal Position	NO
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30

ADG5212BRUZ-RL7 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~125°C TA. Totally, there are 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. SPST - NO switching circuits are used in these analog switch ics. Use ADG5212 to search for variants of the digital switches. There is 160Ohm internal resistance in this digital multiplexer. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 40V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. 9V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 80μA current. A digital multiplexer may suffer damage if voltage is applied above 55μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. With dual power supplies, you should attach at least 9V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating the 4 inputs requires 4 inputs. The data can be transferred over a wide range of bandwidths, called 435MHz bandwidths.