ADG5213BCPZ-RL7

195ns, 165ns SPST - NO/NC 160Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG5213 16 Pins 100pA 15V 16-WQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5213BCPZ-RL7
Package: 16-WQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 160
Description: 195ns, 165ns SPST - NO/NC 160Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG5213 16 Pins 100pA 15V 16-WQFN Exposed Pad, CSP(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-WQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Resistance	200Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5213
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Operating Supply Current	80μA
Max Supply Current	55μA
Throw Configuration	SPST
Turn On Delay Time	210 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	460MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	170 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.8pF 4.8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	195ns, 165ns
Insertion Loss (dB)	-6 dB
Charge Injection	-0.5pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-105dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Drain to Source Resistance	200Ohm
Height Seated (Max)	0.8mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5213BCPZ-RL7 Overview

As the electronic part is packed in 16-WQFN Exposed Pad, CSP, international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~125°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 1 channels. A 15V voltage supply should turn on and run the electronic component. This electrical component is included in the 16 series of products. A SPST - NO/NC switching circuit is used to build these analog multiplexers. ADG5213 can be used to search for analog multiplexer variants. An switch multiplexer with 200Ohm internal resistance has a value of 200Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 9V. 80μA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 55μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. When using dual power supplies, you should attach at least 9V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. In order to operate the 4 inputs, there are several steps to follow. The transfer of data can be performed over 460MHz bandwidths. There is 200Ohm Drain to Source resistance on this electronic part.