Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
160Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG5213 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Max Supply Current |
55μA |
Turn On Delay Time |
210 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Supply Type |
Dual, Single |
Bandwidth |
435MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
170 ns |
Max Dual Supply Voltage |
22V |
-3db Bandwidth |
460MHz |
On-State Resistance (Max) |
160Ohm |
Min Dual Supply Voltage |
9V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
2.8pF 4.8pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
195ns, 165ns |
Insertion Loss (dB) |
-6 dB |
Charge Injection |
-0.5pC |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-105dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
290ns |
Drain to Source Resistance |
160Ohm |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5213BRUZ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~125°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. SPST - NO/NC switching circuits are used in these analog switch ics. Use ADG5213 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 160Ohm. The functions of 16 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 40V in normal situations. The digital multiplexer has a low cost Dual, Single supply. There should be 9V voltage fed to the electrical part below 9V. A voltage higher than 55μA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. When using dual power supplies, you should attach at least 9V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. A 4 input needs to be operated. There are various bandwidths available for data transfer. Drain to Source resistance for this electronic component is 160Ohm.
ADG5213BRUZ Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 460MHz
Bandwidth: 435MHz
Drain-to-Source resistance: 160Ohm
ADG5213BRUZ Applications
There are a lot of Analog Devices Inc. ADG5213BRUZ Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Multi-Line E1 Interface Cards
- Industrial
- Video signal routing
- Relay replacements
- Central office
- Relay Replacement
- Audio and video switching
- Cell phones
- USB 1.1 signal switching circuits