ADG5213BRUZ-RL7

195ns, 165ns SPST - NO/NC 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5213 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5213BRUZ-RL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 613
Description: 195ns, 165ns SPST - NO/NC 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5213 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5213
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Operating Supply Current	80μA
Max Supply Current	55μA
Throw Configuration	SPST
Turn On Delay Time	210 ns
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	460MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	170 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.8pF 4.8pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	195ns, 165ns
Insertion Loss (dB)	-6 dB
Charge Injection	-0.5pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-105dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5213BRUZ-RL7 Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Extended operating temperature around -40°C~125°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. These analog multiplexers are built based on SPST - NO/NC switching circuits. The multiplexer consists of 4 circuits. Search with ADG5213 if you are looking for analog multiplexer variants. There is 160Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 40V should not normally be supplied to the switches. Analogue multiplexers of the Dual, Single supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 9V. The analogue multiplexer could operate on 80μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 55μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. With dual power supplies, you should attach at least 9V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The data can be transferred over a wide range of bandwidths, called 460MHz bandwidths.