ADG5233BCPZ-RL7
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.1mW |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 3 |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADG5233 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Interface | Parallel |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Test Frequency | 1MHz |
| Operating Supply Current | 80μA |
| Power Dissipation | 1.1mW |
| Max Supply Current | 55μA |
| Turn On Delay Time | 175 ns |
| Number of Inputs | 3 |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 205MHz |
| Turn-Off Delay Time | 155 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 370MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 4.5pF 10pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 95ns |
| Insertion Loss (dB) | -6.3 dB |
| Charge Injection | 0.7pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
ADG5233BCPZ-RL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-WQFN Exposed Pad, CSP. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 16. There are 16 pins injected into the electronic part body. SPDT switching circuits are used in these analog switch ics. If you are looking for variants of the digital switch, trying search with ADG5233. Internally, this switch multiplexer has a resistance of 160Ohm. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 40V. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage the electronic part should receive is 9V. It would be sufficient to run this analogue multiplexer with 80μA current. A voltage higher than 55μA may cause damage to the switch multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. In the case of dual power supplies, you should connect at least 9V. A 3 input needs to be operated. The transfer of data can be performed over 205MHz bandwidths. A analog switch ics with 6 outputs is included.
ADG5233BCPZ-RL7 Features
Switch Circuit: SPDT
80μA Supply Current
-3db Bandwidth: 370MHz
Bandwidth: 205MHz
ADG5233BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5233BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Digital Cross-Connects
- Audio/video switches
- Communication systems
- Access Concentrators
- Avionics
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Public switching systems
- ATM
- HDTV
