ADG5233BRUZ

200ns, 95ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5233BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 277
Description: 200ns, 95ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	200Ohm
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.1mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5233
Pin Count	16
Number of Outputs	6
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Power Dissipation	1.1mW
Max Supply Current	55μA
Turn On Delay Time	175 ns
Number of Inputs	3
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	205MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	155 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	370MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	4.5pF 10pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	200ns, 95ns
Insertion Loss (dB)	-6.3 dB
Charge Injection	0.7pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Switch-off Time-Max	125ns
Height	1.05mm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5233BRUZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~125°C TA extended. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 16 pins. SPDT switching circuits are used in these analog switch ics. Try searching for ADG5233 variants of the analog switch ic. In this multiplexer, the internal resistance is 200Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. The analog switch ic is of the Dual, Single supply type and is cost-effective. There should be 9V voltage fed to the electrical part below 9V. Putting voltage greater than 55μA on the multiplexer may cause damage. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. In the case of dual power supplies, you should connect at least 9V. It is possible to operate 3 inputs. There are 205MHz bandwidths for data transfer. Additional features of the electronic component include: VIDEO APPLICATION. 6 outputs are included in the analogue multiplexer.