ADG5233BRUZ-RL7

200ns, 95ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5233BRUZ-RL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 840
Description: 200ns, 95ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5233 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	160Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.1mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5233
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Operating Supply Current	80μA
Power Dissipation	1.1mW
Max Supply Current	55μA
Turn On Delay Time	175 ns
Number of Inputs	3
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	205MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	155 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	370MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	4.5pF 10pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	200ns, 95ns
Insertion Loss (dB)	-6.3 dB
Charge Injection	0.7pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Switch-off Time-Max	125ns
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5233BRUZ-RL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. The analog switch ics are built using SPDT switching circuits. Using the ADG5233 search parameter, you can discover variants of the switch. This digital multiplexer has 160Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 40V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 9V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 80μA current. The analogue multiplexer may be damaged if voltage is greater than 55μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. When using dual power supplies, you should attach at least 9V. There are 3 inputs to be operated. 205MHz-bandwidths can be used to transfer data between multiplexers. This electrical component also includes additional features such as VIDEO APPLICATION. This digital multiplexer has 6 outputs.