ADG5234BRUZ

200ns, 95ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5234 20 Pins 100pA 15V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5234BRUZ
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 749
Description: 200ns, 95ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5234 20 Pins 100pA 15V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	200Ohm
Terminal Finish	MATTE TIN
Additional Feature	VIDEO APPLICATION
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.1mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5234
Pin Count	20
Number of Outputs	8
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Power Dissipation	1.1mW
Max Supply Current	55μA
Turn On Delay Time	175 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	205MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	155 ns
Max Dual Supply Voltage	22V
-3db Bandwidth	370MHz
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	4.5pF 10pF
On-state Resistance Match-Nom	3.5Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	200ns, 95ns
Insertion Loss (dB)	-6.3 dB
Charge Injection	0.7pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	290ns
Switch-off Time-Max	125ns
Height	1.05mm
Length	6.6mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5234BRUZ Overview

The electrical component comes in 20-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. The operating temperature is extended to around -40°C~125°C TA. 20 terminations have been made so far. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. It is injected into the electrical part body with 20 pins. Multiplexers built on a SPDT switching circuit are built. Try searching for ADG5234 variants of the analog switch ic. In this multiplexer, the internal resistance is 200Ohm. The functions of 20 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 40V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 9V. Putting voltage greater than 55μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 22V. A dual power supply should have at least 9V voltage attached. There are 4 inputs to be operated. 205MHz-bandwidths can be used to transfer data between multiplexers. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION. The analog switch ics has 8 outputs.