ADG5234BRUZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | MATTE TIN |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.1mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG5234 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Test Frequency | 1MHz |
| Operating Supply Current | 80μA |
| Power Dissipation | 1.1mW |
| Max Supply Current | 55μA |
| Turn On Delay Time | 175 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 205MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 155 ns |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 370MHz |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 4.5pF 10pF |
| On-state Resistance Match-Nom | 3.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 200ns, 95ns |
| Insertion Loss (dB) | -6.3 dB |
| Charge Injection | 0.7pC |
| Channel-to-Channel Matching (ΔRon) | 3.5 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 290ns |
| Switch-off Time-Max | 125ns |
| Height Seated (Max) | 1.2mm |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5234BRUZ-RL7 Overview
Due to its 20-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 20 terminations. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. There is an electrical component included in the 20 series. Circuits based on SPDT switching are used to construct these analog switch ics. If you are looking for variants of the digital switch, trying search with ADG5234. A 160Ohm internal resistance characterizes this multiplexer. To find out what the functions of 20 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 40V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 9V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 80μA current. Putting voltage greater than 55μA on the multiplexer may cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. In the case of dual power supplies, you should connect at least 9V. In order to operate the 4 inputs, there are several steps to follow. There are various bandwidths available for data transfer. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION. In this digital multiplexer, there are 8 outputs.
ADG5234BRUZ-RL7 Features
1 Channels
Switch Circuit: SPDT
80μA Supply Current
-3db Bandwidth: 370MHz
Bandwidth: 205MHz
Additional Features: VIDEO APPLICATION
ADG5234BRUZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5234BRUZ-RL7 Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Isolation
- Audio and video signal routing
- Medical Instrumentation
- Central office
- Industrial
- Battery-powered systems
- Transmit
- PBXs
- Mechanical reed relay replacement
