ADG5236BCPZ-RL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexers or Switches |
| Max Power Dissipation | 1.1mW |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG5236 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 9V |
| Test Frequency | 1MHz |
| Operating Supply Current | 85μA |
| Power Dissipation | 1.1mW |
| Max Supply Current | 55μA |
| Turn On Delay Time | 215 ns |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±9V~22V |
| Supply Type | Dual, Single |
| Bandwidth | 266MHz |
| Turn-Off Delay Time | 185 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 160Ohm |
| Min Dual Supply Voltage | 9V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 12pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 190ns, 180ns |
| Insertion Loss (dB) | -0.7 dB |
| Charge Injection | -0.6pC |
| Channel-to-Channel Matching (ΔRon) | 1.3 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 380ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG5236BCPZ-RL7 Overview
As the electronic part is packed in 16-WQFN Exposed Pad, CSP, international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. A total of 16 terminations have been recorded. The electronic part body is injected with 16 pins. A SPDT switching circuit is used to build these analog multiplexers. This multiplexer is composed of 2 circuits. ADG5236 can be used to search for analog multiplexer variants. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. Please refer to the datasheets for 16 pins functions. Theswitch device is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 40V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 9V should be applied to the electronic component. The switch device would be able to operate with 85μA current. It may damage the digital multiplexer if the voltage is higher than 55μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. When using dual power supplies, you should attach at least 9V. This analog switch ic utilizes SEPARATE OUTPUT output. It is possible to transfer data over a 266MHz-bandwidth.
ADG5236BCPZ-RL7 Features
Switch Circuit: SPDT
85μA Supply Current
Bandwidth: 266MHz
ADG5236BCPZ-RL7 Applications
There are a lot of Analog Devices Inc. ADG5236BCPZ-RL7 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- SDH/SONET multiplexers
- Relay Replacement
- Digital access cross connects
- New designs requiring multiplexer functions
- Voice over IP/DSL – Integrated Access Devices, Smart
- Residential Gateways, Home Gateway/Router
- Remote Powered Equipment
- MP3 players
- PDAs
