Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
160Ohm |
Subcategory |
Multiplexers or Switches |
Max Power Dissipation |
1.1mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG5236 |
Pin Count |
16 |
Number of Outputs |
4 |
Polarity |
Non-Inverting |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
40V |
Min Supply Voltage |
9V |
Test Frequency |
1MHz |
Power Dissipation |
1.1mW |
Max Supply Current |
55μA |
Turn On Delay Time |
215 ns |
Number of Inputs |
2 |
Voltage - Supply, Single/Dual (±) |
9V~40V ±9V~22V |
Supply Type |
Dual, Single |
Bandwidth |
266MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
185 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
160Ohm |
Min Dual Supply Voltage |
9V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
2.5pF 12pF |
On-state Resistance Match-Nom |
1.4Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
190ns, 180ns |
Insertion Loss (dB) |
-0.7 dB |
Charge Injection |
-0.6pC |
Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Height |
1.05mm |
Length |
5.1mm |
Width |
4.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG5236BRUZ Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~125°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. If you are looking for variants of the digital switch, trying search with ADG5236. Analog switches have 160Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 40V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 9V as the lowest voltage for the electrical part. It may damage the digital multiplexer if the voltage is higher than 55μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. A dual power supply should have at least 9V voltage attached. Operating 2 inputs is required. A 266MHz-bandwidth can be used for data transfer. 4 outputs are included in the analogue multiplexer.
ADG5236BRUZ Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 266MHz
ADG5236BRUZ Applications
There are a lot of Analog Devices Inc. ADG5236BRUZ Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Precision test equipment
- DVD-R
- ISDN NT1/TA
- Residential Gateways, Home Gateway/Router
- Wireless Local Loop
- Channel Banks
- Precision data acquisition
- E1 Network Equipment
- Automatic test equipment