ADG5236BRUZ-RL7

190ns, 180ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5236 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG5236BRUZ-RL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 932
Description: 190ns, 180ns SPDT 160Ohm Analog Switches BREAK-BEFORE-MAKE ADG5236 16 Pins 100pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	160Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexers or Switches
Max Power Dissipation	1.1mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG5236
Pin Count	16
Number of Outputs	4
Qualification Status	Not Qualified
Number of Channels	1
Interface	Parallel
Max Supply Voltage	40V
Min Supply Voltage	9V
Test Frequency	1MHz
Operating Supply Current	85μA
Power Dissipation	1.1mW
Max Supply Current	55μA
Turn On Delay Time	215 ns
Number of Inputs	2
Voltage - Supply, Single/Dual (±)	9V~40V ±9V~22V
Supply Type	Dual, Single
Bandwidth	266MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	185 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	9V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	2.5pF 12pF
On-state Resistance Match-Nom	1.4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	190ns, 180ns
Insertion Loss (dB)	-0.7 dB
Charge Injection	-0.6pC
Channel-to-Channel Matching (ΔRon)	1.3 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	300ns
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG5236BRUZ-RL7 Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~125°C TA. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. These analog multiplexers are built based on SPDT switching circuits. ADG5236 can be used to search for analog multiplexer variants. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. A voltage higher than 40V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 9V voltage fed to the electrical part below 9V. The switch device would be able to operate with 85μA current. It may damage the digital multiplexer if the voltage is higher than 55μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. With dual power supplies, you should attach at least 9V. The electrical component supports 2 inputs. There are 266MHz bandwidths for data transfer. In this digital multiplexer, there are 4 outputs.