banner_page

ADG5249FBRUZ-RL7

245ns, 135ns SP4T 335Ohm DUAL Analog Switches ADG5249 20 Pins 1nA 15V 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG5249FBRUZ-RL7
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 603
  • Description: 245ns, 135ns SP4T 335Ohm DUAL Analog Switches ADG5249 20 Pins 1nA 15V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Resistance 335Ohm
Terminal Finish Tin (Sn)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ADG5249
Pin Count 20
Number of Channels 4
Number of Circuits 2
Max Supply Voltage 44V
Min Supply Voltage 8V
Analog IC - Other Type DIFFERENTIAL MULTIPLEXER
Voltage - Supply, Single/Dual (±) 8V~44V ±5V~22V
Neg Supply Voltage-Nom (Vsup) -15V
Max Dual Supply Voltage 22V
-3db Bandwidth 320MHz
On-State Resistance (Max) 335Ohm
Min Dual Supply Voltage 5V
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 75 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 4pF 7pF
On-state Resistance Match-Nom 2.5Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 245ns, 135ns
Charge Injection -1.2pC
Channel-to-Channel Matching (ΔRon) 3 Ω
Crosstalk -75dB @ 1MHz
Switch-on Time-Max 315ns
Switch-off Time-Max 160ns
Length 6.5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

ADG5249FBRUZ-RL7 Overview


The electrical component comes in 20-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 4:1. Increasing operating temperature to around -40°C~125°C TA. 20 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 20 series. Unlike digital switches, these are based on SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Search with ADG5249 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 335Ohm. Datasheets for functions of 20 pins are available. It is generally not recommended to supply a voltage higher than 44V to the switch device in normal circumstances. It is recommended to use 8V as the lowest voltage for the electrical part. For this switch, a dual supply voltage is feasible, but it must not exceed 22VWhen using dual power supplies, you should attach at least 5V. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.

ADG5249FBRUZ-RL7 Features


4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 320MHz

ADG5249FBRUZ-RL7 Applications


There are a lot of Analog Devices Inc. ADG5249FBRUZ-RL7 Analog Switches & Multiplexers ICs applications.

  • Audio and video switching
  • E1 Multiplexer
  • Precision test equipment
  • ATM
  • Wireless Local Loop
  • Video switching
  • Switching Systems
  • Industrial control systems
  • High speed data transmission line cards
  • Channel Banks

Write a review

Note: HTML is not translated!
    Bad           Good