ADG526ABQ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-CDIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADG526 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 470mW |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 5.59mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
ADG526ABQ Overview
As the electronic part is packed in 28-CDIP (0.600, 15.24mm), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Through Hole. Multiplexer and demultiplexer circuits have a number 16:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Totally, there are 28 terminations. The electronic part provides high-quality output because it has 16 channels. A 15V voltage supply should turn on and run the electronic component. A key feature of the 28 series is the inclusion of this electronic part as part of its design. A total of 1 circuits make up this switch device. Use ADG526 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 450Ohm. The functions of 28 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. The lowest voltage the electronic part should receive is 10.8V. There is no problem with using dual supply voltage, but it should not exceed 16.5V. It is recommended that you attach at least 10.8V to your dual power supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. In order to operate the 16 inputs, there are several steps to follow.
ADG526ABQ Features
16 Channels
ADG526ABQ Applications
There are a lot of Analog Devices Inc. ADG526ABQ Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- ISDN NT1/TA
- MP3 players
- New designs requiring multiplexer functions
- Communication systems
- PDH Multiplexers
- Communication systems
- Transmit
- Video signal routing
- Battery-powered systems
