ADG526AKP-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG526 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 26mW |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 4.57mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG526AKP-REEL Overview
The electrical component comes in 28-LCC (J-Lead) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 16:1. Around -40°C~85°C TA is the extended operating temperature. In total, there are 28 terminations. This electronic part offers high-quality output due to its 16 channels. With a 15V voltage supply, the electrical component should be turned on and run. An electrical component of this type can be found in the 28 series. This multiplexer is composed of 1 circuits. ADG526 can be used to search for analog multiplexer variants. The datasheets for the 28 pins explain the functions. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 16.5V to a switch device. The lowest voltage the electronic part should receive is 10.8V. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. With dual power supplies, you should attach at least 10.8V. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating the 16 inputs requires 16 inputs.
ADG526AKP-REEL Features
16 Channels
ADG526AKP-REEL Applications
There are a lot of Analog Devices Inc. ADG526AKP-REEL Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Cable PC
- Audio/video switches
- SONET
- Medical
- Cable Modem
- Mechanical reed relay replacement
- E1 Network Equipment
- Precision data acquisition
- PDAs
