banner_page

ADG526AKR

300ns, 300ns 450Ohm Analog Switches BREAK-BEFORE-MAKE ADG526 28 Pins 1nA 15V 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-ADG526AKR
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 402
  • Description: 300ns, 300ns 450Ohm Analog Switches BREAK-BEFORE-MAKE ADG526 28 Pins 1nA 15V 28-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Contact Plating Lead, Tin
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Surface Mount YES
Number of Pins 28
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Resistance 450Ohm
Subcategory Multiplexer or Switches
Max Power Dissipation 470mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 220
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number ADG526
Pin Count 28
Number of Channels 16
Interface Parallel
Number of Circuits 1
Max Supply Voltage 16.5V
Min Supply Voltage 10.8V
Analog IC - Other Type SINGLE-ENDED MULTIPLEXER
Operating Supply Current 600μA
Nominal Supply Current 1.5mA
Power Dissipation 26mW
Max Supply Current 1.5mA
Propagation Delay 300 ns
Turn On Delay Time 450 ns
Number of Inputs 16
Voltage - Supply, Single/Dual (±) 10.8V~16.5V ±10.8V~16.5V
Supply Type Dual, Single
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 450 ns
Max Dual Supply Voltage 16.5V
On-State Resistance (Max) 450Ohm
Min Dual Supply Voltage 10.8V
High Level Output Current 20mA
Dual Supply Voltage 12V
Multiplexer/Demultiplexer Circuit 16:1
Off-state Isolation-Nom 68 dB
Current - Leakage (IS(off)) (Max) 1nA
Channel Capacitance (CS(off), CD(off)) 5pF 44pF
On-state Resistance Match-Nom 5Ohm
Switch Time (Ton, Toff) (Max) 300ns, 300ns
Charge Injection 4pC
Channel-to-Channel Matching (ΔRon) 22.5 Ω
Switching BREAK-BEFORE-MAKE
Signal Current-Max 0.02A
Height 2.35mm
Length 18.1mm
Width 7.6mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ADG526AKR Overview


The electrical component comes in 28-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 16:1. Extended operating temperature around -40°C~85°C TA. A total of 28 terminations have been recorded. High-quality output is provided by the electronic component's 16 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 28 pins. There are 1 circuits in this switch device. Using the ADG526 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 450Ohm. For details about the functions of 28 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. Dual, Single supply type digital switch with a low cost. A low voltage of 10.8V should be applied to the electronic component. This multiplexer would work with 600μA current. A voltage higher than 1.5mA may cause damage to the switch multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Among the inputs that can be operated are the 16 inputs.

ADG526AKR Features


16 Channels
600μA Supply Current

ADG526AKR Applications


There are a lot of Analog Devices Inc. ADG526AKR Analog Switches & Multiplexers ICs applications.

  • E1 Network Equipment
  • Digital access cross connects
  • PBX interfaces
  • HDTV
  • USB 1.1 signal switching circuits
  • Sample hold systems
  • Audio/video switches
  • Ultrasound
  • Battery Powered Systems
  • Signal routing between systems

Write a review

Note: HTML is not translated!
    Bad           Good