ADG526ATQ
| Parameters | |
|---|---|
| Base Part Number | ADG526 |
| Pin Count | 28 |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 26mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 400 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 5.59mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 28-CDIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 28mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
ADG526ATQ Overview
Presented in 28-CDIP (0.600, 15.24mm), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. 28 terminations have been made so far. The electronic part delivers high-quality output through its 16 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 28 pins. A total of 1 circuits make up this switch device. Using the ADG526 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 450Ohm. The datasheets for the 28 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 16.5V in normal situations. A low voltage of 10.8V should be applied to the electronic component. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. With dual power supplies, you should attach at least 10.8V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. A 16 input needs to be operated.
ADG526ATQ Features
16 Channels
ADG526ATQ Applications
There are a lot of Analog Devices Inc. ADG526ATQ Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Remote Powered Equipment
- Industrial and process control systems
- USB 1.1 signal switching circuits
- Fiber In The Loop (FITL)
- Transmit
- Avionics
- Residential Gateways, Home Gateway/Router
- Low-Voltage
