Parameters |
Analog IC - Other Type |
DIFFERENTIAL MULTIPLEXER |
Power Dissipation |
26mW |
Number of Inputs |
16 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±10.8V~16.5V |
Supply Current-Max (Isup) |
1.5mA |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
16.5V |
On-State Resistance (Max) |
450Ohm |
Min Dual Supply Voltage |
10.8V |
High Level Output Current |
20mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 44pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Time (Ton, Toff) (Max) |
300ns, 300ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
22.5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
300ns |
Switch-off Time-Max |
300ns |
Height |
2.35mm |
Length |
18.1mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
28 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
ECCN Code |
EAR99 |
Resistance |
450Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
28mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG527 |
Pin Count |
28 |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
16.5V |
Min Supply Voltage |
10.8V |
ADG527AKRZ Overview
Presented in 28-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 28 terminations. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. The electronic part body is injected with 28 pins. It consists of 2 circuits. Try searching with ADG527 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 450Ohm. You can find the functions of the 28 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 16.5V voltage to the switch device. The lowest voltage fed to the electronic component should be 10.8V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. A 16 input needs to be operated.
ADG527AKRZ Features
8 Channels
ADG527AKRZ Applications
There are a lot of Analog Devices Inc. ADG527AKRZ Analog Switches & Multiplexers ICs applications.
- Cross Connects
- New designs requiring multiplexer functions
- Remote wireless modules
- Low-Voltage
- Communication systems
- Relay replacements
- Video switching
- Intelligent PBX
- Cable PC
- Medical Instrumentation