ADG528ABQ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-CDIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 450Ohm |
| Max Power Dissipation | 28mW |
| Reach Compliance Code | not_compliant |
| Base Part Number | ADG528 |
| Pin Count | 18 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Power Dissipation | 470mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 22pF |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Height | 5.08mm |
| Length | 24.38mm |
| Width | 7.87mm |
| RoHS Status | Non-RoHS Compliant |
ADG528ABQ Overview
As the electronic part is packed in 18-CDIP (0.300, 7.62mm), international shipping is convenient. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexer and demultiplexer circuits have a number 8:1. The operating temperature is extended to around -40°C~85°C TA. An injection of 18 pins is performed into the body of the electrical component. 1 circuits are used in this analogue multiplexer. Use ADG528 to search for variants of the digital switches. A 450Ohm internal resistance characterizes this multiplexer. For details about the functions of 18 pins, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. It is recommended that the electrical component receives a voltage of 10.8V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. You should attach at least 10.8V voltage if you are using dual power supply. Among the inputs that can be operated are the 8 inputs.
ADG528ABQ Features
ADG528ABQ Applications
There are a lot of Analog Devices Inc. ADG528ABQ Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Digital access cross connects
- Access Concentrators
- Sample hold systems
- Imaging
- Relay replacements
- Data Acquisition Systems
- Private Branch Exchange (PBX)
- FTTH
- PBXs
