ADG528AKNZ

300ns, 300ns 450Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG528 18 Pins 1nA 15V 18-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG528AKNZ
Package: 18-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 968
Description: 300ns, 300ns 450Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG528 18 Pins 1nA 15V 18-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Through Hole
Package / Case	18-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	18
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	18
ECCN Code	EAR99
Resistance	700Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Base Part Number	ADG528
Pin Count	18
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	600μA
Nominal Supply Current	1.5mA
Power Dissipation	28mW
Max Supply Current	1.5mA
Throw Configuration	DPST
Propagation Delay	300 ns
Turn On Delay Time	600 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	600 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	450Ohm
Min Dual Supply Voltage	10.8V
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	22.5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	280Ohm
Signal Current-Max	0.02A
Height	3.3mm
Length	22.86mm
Width	6.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG528AKNZ Overview

Packed in 18-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 8:1. The operating temperature is extended to around -40°C~85°C TA. 18 terminations have been made so far. A electrical component with 8 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. Into the electrical component body are injected 18 pins. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG528. An switch multiplexer with 700Ohm internal resistance has a value of 700Ohm. Please refer to the datasheets for 18 pins functions. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 16.5V volts for the multiplexer. It is recommended that the electrical component receives a voltage of 10.8V. For this digital switch to work, 600μA current would suffice. If put voltage greater than 1.5mA on the device, damage may be caused to the analogue multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 16.5V. When using dual power supplies, you should attach at least 10.8V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A 8 input needs to be operated. There is 280Ohm resistance between the Drain and Source on this part.